G-Series
(12-1541 scfm)
Mikropor Compressed Air Filters have been designed to meet all requirements of compressed air filtration world. These air filters provide more comfortable usage for end users an increased endurance, higher efficency at lower pressure drop and more port size options.
Filtration
Due to the usage of deep pleating technique the filtration area has increased remarkably which leads to a better filtration and higher dirt holding capacity. Mikropor Compressed Air Filters have been designed to remove airbone contamination in compressed air stream, delivering energy efficient operation and reliable performance.
GO-Series
(12-1541 scfm)
New additional to our G series, Mikropor “GO” series compressed air filters are designed for easy element replacement for “zero clearance” ability.
Features:
• The air filters have four efficiency ratings, removing contaminants as small as 0.01 micron at up to 290 psi (20 bar) - 1/4” to 3” NPT/BSP pipe sizes.
• A protected auto float drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants.
• These air filters have zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion resistant internal coating for a long service life.
•Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards.
• These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency. Mikropor compressed air filters are always recommended with this system.
Flanged Filters
(15-200 psig)
Features
• Elements are assembled with a tie rod system
• Two external float drains for maximum drainage
• Unique design for pre-separation zone
• Strong welded design
• CE and ASME tanks available
•Design for easy element change from top flange
External Float Drain
Mikropor external drain is designed to remove liquid condensation
from collection points in a Compressed Air System.
Durable epoxy powder-coat finish and corrosion resistant internal
anodised coating for longer service life
Mist Eliminators
(15-200 psig)
Mist Eliminators are designed to meet the demand for: Efficient removal of oil and mist carryover from piston or oil flooded rotary compressors.
Features:
• Ultra low pressure drop reduces energy costs
• Positive gasket seals eliminate media bypass
• Filter change out differential 170 mbar (2.5 psi)
• True Air/Oil Separator
• Long service life
HG-Series
(50-350 psig)
Features
Mikropor manufactures a line of High Performance Compressed Air Filters, Moisture Separators in two different ranges;
50 bar range made of Aluminium. No welding, strong and reliable design.
350 bar range made of Steel. No welding and designed for reliability at very high pressure applications.
Anodised Aluminium Design with High Performance
Mikropor High Pressure Range Compressed Air Filters are NO-weld design. These Filters are built with ample wall thickness and as a result are extremely robust. In-house high pressure test facilities assure the performance. All inner and outer surfaces of 50 bar Aluminium design Filters are Anodised, where 350 bar Carbon Steel design Filters are epoxy electro powder coated.
