C-Series
(5-30 hp)
Compact and energy-efficient, the C-Series electric rotary screw air compressors are low noise units ideal for auto body shops and small facilities. The simple internal structure makes maintenance easy.
Features & Benefits
•Energy efficient
•Quiet – 68dba
•TEFC motor
•208/230/460/3/60 voltage
•Microprocessor controlled
•Multipoint measuring and protection of pressure and temperature
•RS-485 communication interface function
•Seven function maintenance schedule/monitoring
•Full function electrical control for motor protection: motor overload relay, phase protection
•Single phase 5-10 hp, tri-voltage 10-30 hp
M-Series
(5, 7.5, 10 hp)
Engineered to be both reliable and versatile, the M-Series industrial air compressor is another energy efficient continuous duty compressed air solution developed by Sullivan-Palatek. The M-Series compressors are offered in 5, 7.5 and 10 hp. These units are equipped with full voltage magnetic starters, automatic dual control, and easily replaceable combination pleated and foam dry type air filters. Compact in size, they are ideally made to be used in smaller industrial settings such as automotive shops, small machining factories and textile workshops.
Features & Benefits
•Three phase open drip motor options include 200/208/230/460/575 volts
•Full voltage magnetic starter with 115-volt control power
•Instrumentation includes line pressure gauge, oil temperature gauge, and hour meter
•Automatic dual control
•Spin on type oil filter and separator elements provide for ease of maintenance
•Tank mount, elevated platform and acoustical enclosure options available
D-Series
(15-40 hp)
Engineered to be both dependable and versatile, the D-Series industrial electric direct drive rotary screw air compressor is one of many energy-efficient solutions developed by Sullivan-Palatek. The D-Series compressors are offering a range of 15-40 hp. They are equipped with an easily readable microprocessor, a coupling and air end mounted to the motor C-face. It utilizes a sizeable oversized separator element & sump tank as well as easily replaceable oil & air intake filters. With their compact size and high reliability, these machines are ideal for smaller industrial settings such as automotive shops, small machining facilities, and fabrication facilities.
Features & Benefits
•Microprocessor controller with sequencer, lead-lag and remote monitoring for up to 8 machines
•NEMA 1 ODP premium efficient three phase, 60 Hz, 200/208/230/460 or 575 volt motor
•The motor starter has a NEMA 1 enclosure, 208/230/460/575 volt, with full magnetic voltage (MFV) starter with 110-volt controls, ETL listed, solid state control circuit breaker protection and three phase overload with external reset and phase protection
•The air end, manufactured by Sullivan-Palatek, has advanced rotor design features; oversize radial thrust bearings, and precision working rotary screws that provide virtually no wear
•Protective devices include class 20 solid state overload relay, high temperature, and overpressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized
•Coupling and drive: compressor is flange mounted to motor C-face for positive alignment and directly coupled for increased efficiency
•Cooling system equipped with double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature to within 15 degrees of ambient
•Oversized dry type air intake filter with easily replaceable elements
•One-piece lube fill elbow and level sight glass, a vented cap for pressure release when removing
Inlet/check valve features a one-piece housing for dependable performance and complete modulation
DG-Series
(25-50 hp)
Developed to be dependable and efficient, the DG-Series industrial electric direct gear drive air compressor is another versatile Sullivan-Palatek product. The DG-Series compressors offer a range of 25-50 hp. The compressor is a continuous duty, and fluid flooded rotary screw that is directly coupled to the motor for positive alignment. The compressors compact size makes it the ideal product for smaller industrial settings such as food processing, automotive shops and fabrication workshops.
Features & Benefits
•Microprocessor controller with sequencer, lead-lag and remote monitoring for up to 8 machines
•NEMA 1 ODP premium efficient three phase, 60 Hz, 200/208/230/460 or 575 volt motor
•Motor starter has a NEMA 1 enclosure, 208/230/460/575 volt, with magnetic full voltage (MFV) starter with 110-volt controls, ETL listed, solid state control circuit breaker protection and three phase overload with external reset and phase protection
•The air end, manufactured by Sullivan-Palatek, has advanced rotor design features; oversize radial thrust bearings, and precision working rotary screws that provide virtually no wear
•Protective devises include class 20 solid state overload relay, high temperature and over pressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized
•Couplings and drive: compressor is flange mounted to motor C-face for positive alignment and directly coupled for increased efficiency
•Cooling system equipped with double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature to within 15 degrees of ambient
•Oversized dry type air intake filter with easily replaceable elements
•One-piece lube fill elbow and level sight glass, vented cap for pressure release when removing
Inlet/check valve features a one-piece housing for dependable performance and complete modulation
CDD Packages
(5-30hp)
The CDD is a practical solution to the problems of oil, water vapor and contaminants in compressed air systems. It supplies clean, dry air for critical applications.
Compressed air, a reliable source of pneumatic power in many applications, is adversely affected by oil, dirt, and water. In a variety of applications (automotive paint booths, concrete plants, and general manufacturing facilities, for example) moisture, particulate, and oil in compressed air lines contribute to lower productivity, higher operating costs, and increased maintenance.
The CDD 3-in-1 duplex system typically requires less than 10% of air for regeneration and achieves a -40º F pressure dew point for flow rates of up to 200 cfm. The modular design allows for expansion to accommodate changes in air system requirement of flow rates from 40 cfm to 200 cfm.
Features & Benefits
•Unload shutdown
•The solid aluminum hard coat anodize provides superior strength and corrosion resistance
•Pre-filtration units can handle up to a quart of liquid per minute
•Offers low dew points, and consistently drops relative humidity below 10%
•No need for float drains on the pre-filtration parts
